Pipe Clamps & False Ceiling Accessories
Rubber Lined Split Nut Clamps
Construction Features
Strengthened lock bolts for high load capacity.
can be used for both horizontal and vertical installations.
Rubber lining for suppression of sound and vibration.
M6 side screws with PE Captive disc.
Grooved construction for added strength.
Technical Specifications
Material: Mild Steel.
Coating : Zinc Plated.
Welded Nut M8/M10.
Safe and Breaks Loads as per Chart.
Measurements are subject to 5% tolerance.
Sprinkler Clamps
Construction Features
One piece clip guarantees a high permissible load.
Mounting without any tools.
Locking device allows easy pre-mounting.
Adjustable in height.
Technical Specifications
Material: Mild Steel
Coating : Zinc Plated
For use in Fire fighting and Sprinkle applications
Designed to meet International Standards
Measurements are subject to 5% tolerance.
Standard Clevis Hanger
Construction Features
Designed for chilled water pipe work and fire fighting systems
Design permits vertical adjustment of pipe after installation
Hanger load nut above Clevis must be tightened securely
Technical Specifications
Material: Mild Steel
Designed to meet International Standards
Measurements are subject to 5% tolerance.
U Clamps
Construction Features
Use to mount plain or insulated pipes
Technical Specifications
Material: Mild Steel with Zinc Plated and G.I.
Designed to meet International Standards
Measurements are subject to 5% tolerance.
Two Piece Channel Clip
Construction Features
Use for parallel piping mounted on channels
Quick installation design
Technical Specifications
Material: Mild Steel
Designed to meet International Standards
Electrogalvanised as per ASTM B 633 Standards
Hot dipped galvanized can be provided on request
Measurements are subject to 5% tolerance.
U Bolt
Construction Features
High load capacity due to one piece design
Supplied with two or four nuts
Special U Bolts with longer tangents and threads cab ne furnished on request
Technical Specifications
Material: Mild Steel
Designed to meet International Standards
Hot dipped galvanized can be provided on request
Measurements are subject to 5% tolerance.
Wire Connecting Clip
We offer furring clip and preformed wire connecting.
Description:2.5mm dia preformed wire clip to fit Furring Chanel and "C"Channel
Material: 2.5mm Hot Dip Galvanised steel wire
Packed: 500 per internal box
Application: Part of Gypsum board framing support system
Channel Bracket
Description: 38mm Channel Clamp to hold channel to ceiling by Threaded Rod
Material : Galvanized steel
Double Spring Clip
Description: Double spring adjustable clip ceiling leveling
Material: Spring Steel
Channel Clamp
Description: 38mm channel clamp to hold channel to ceiling by Threaded Rod
Material: Hot dip Galvanized Steel
Double Girder Type EOT Crane
Design and manufactured in accordance with IS 807, IS 3177
Capacity rage: 1 ton to 100 ton
Span: up to 30 mtr.
Duty class: class i/ class ii/ class iii/ class iv
with feature variants i.e.
Twin trolley (double trolley)
Twin hook (double hook)
Multi speed (dual speed)
Cabin operated with master controls
Cabin operated with push buttons
Floor operated through pendent push buttons.
Used for large capacity with large span.
Suitable for large headroom.
Used for high frequency is any motions.
Single Girder Type EOT Crane
Design and manufactured in accordance with IS 807, IS 3177
Capacity rage: 1 ton to 15 ton
Span: up to 30 mtr.
Duty class: class I/ class ii/ class iii/ class iv
with feature variants i.e.
Twin hoist (double hoist)
Twin hook (double hook)
multi speed (dual speed)
Used when law headroom.
Run under I Beam & box beam which is traveling on rail.
Totally used on shop floor area without any obstruction.
Cost effective.
Best solution for longer span.
Monorail Hoist
Design and manufactured in accordance with IS 3938
Capacity rage: 1 ton to 15 ton
Span: up to 30 mtr.
Duty class: class i/ class ii/ class iii/ class iv.
With feature variants i.e.
Multi speed (dual speed)
Flame proof application
The special feature are low headroom spur/helical gears running on antifriction ball bearings with oil bath lubrication, Motors conforming to IS 325, "fail to safe" brakes which automatically operates in case of any power failure, tasted wire rope conforming to IS 2266, longed hooks conforming to IS 3815 and push button station operating at step down voltage of 110v, 24v.
Special Dual Hook Type Hoist
Specially developed for Dam Doors operating.
We also manufacture customized Electric winches.
Capacity up to 30 Ton
With Features Variants i.e.
Multi Speed / Dual Speed
Under Slung Crane & Goods Lift
Under Slung Crane